Assist-A-Tray

The tray table is compatible with any four-legged couch, sofa, chair, lift chair or recliner. The front and rear legs of the chair must sit on top of the base pads to hold the tray in place. The base pads adjust in depth to fit chair legs 19-32.5 inches apart. If your chair does not have four legs, has a round base, or has legs with depths shorter than 19 inches, deeper than 32.5 inches, this tray will not work with your chair. Before purchasing, we recommend measuring the depth between the front and rear legs of the intended chair to make sure they fit in the 19-32.5 inch compatibility range.

No, the tray is not intended for free-standing use or for use on a bed. It must be installed underneath a couch or chair to be held in place.

The Assist-A-Tray is leveled by adjusting the three bolts on the tray hanging bracket. Turn the Center Adjustment Bolt clockwise to raise the tray and counterclockwise to lower the tray. Once the tray is leveled, tighten the two smaller clamping bolts to the side. Consult the user manual for additional instructions.

No, the tray cannot be adjusted by angle. But it does swivel and rotate 360 degrees.

The Assist-A-Tray includes a built-in cup holder and utensil holder.